RIVO S625 MT6260 Flash File Sactter + Bin

RIVO S625 MT6260 Flash File / Firmware Sactter + Bin

Wait for phone...
Phone found! [ 26 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info : 
BB_CPU_ID : 6260
BB_CPU_HW : CB00
BB_CPU_SW : 0000
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6260_S0000
BB_CPU_SN : D2A923B405640D59A2B526E35A870524
BROM Protocol Version : 05
Setting...
Setting done , result code 0x000E
BROM stage done
Seek and prepare DownloadAgent
DownloadAgent matching HW Found!
DA verify and select done
Sending DA to target ...
InitRes : 00000000
DEV[0] : C800 6000 1800 0000
DEV[1] : 0000 0000 0000 0000
DA_INFO   : 0xC0 , Ver : 3.2 , BBID : 0x8B
SOC_VERIFY : 0xC1
BOOT_STYLE : SF_FLASH_BOOT
NOR Flash IC initialized
[0] : FLASH_VEN : 0x00F4 , [GigaDevice] GD25LQ128
[0] : FLASH_DIE : 00C8 0060 0018 0000 
[0] : FLASH_LEN : 0x01000000
INT_RAM : 0x0000D000
EXT_RAM : 0x00800000
Reading Flash Content now ... 

Read Flash now
Read Ok , 16777216 bytes read
Check and collect compile info
File_Info   : UL28_XB61_RIVO_S625_PCB01_gprs_MT6260_S00.RIVO_S625_V05.bin
FileVersion : Rivo_S625_V05

[ScatCFG] : MT6260 / Rivo_S625_V05 / NOR , SF
Firmware saved to : C:\InfinityBox\CM2MTK\Read_out\UL28_XB61_RIVO_S625_PCB01_gprs_MT6260_S00\

Done!
Elapsed: 00:01:00
Reconnect Power/Cable!

[post_ad]

Bin Flash File

UL28_XB61_RIVO_S625_PCB01_gprs_MT6260_S00.RIVO_S625_V05.bin

How To Flash Bin:

its a bin flash file and you can flash it with any flashing box or flash tool which is support to flash MT6260 Chip.

Scatter Flash File

UL28_XB61_RIVO_S625_PCB01_gprs_MT6260_S00

How To Flash MTK Feature Phone:

• Its a Scatter file you can flash it with Flash Tool or any Flasher Box 
• Select “scatter-Loading” and Slect XXXX_cfg in folder
• Wait file to be added into Flash Tool Or Any Flashing box
• Turn off your phone
• Press “Download” Button to start
• And connect your phone with PC via USB data cable.
• The process will start and a red progress bar will appear after color purple, yellow.
• And green circles display
• Finish !
• You can now safely disconnect your phone and turn it on.
• its Done..!

Full Tutorial Here