Qmobile R850 MT6260 Flash File

Sync Ok, read regs...
Inital regs read done
Boot Info : 
BB_CPU_ID : 6260
BB_CPU_HW : CB00
BB_CPU_SW : 0000
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6260_S0000
BB_CPU_SN : E49BE81AE8564D2BB0C68A1500548A01
BROM Protocol Version : 05
Setting...
Setting done , result code 0x000E
BROM stage done
Seek and prepare DownloadAgent
DownloadAgent matching HW Found!
DA verify and select done
Sending DA to target ...
InitRes : 00000000
DEV[0] : C200 2500 3700 0000
DEV[1] : 0000 0000 0000 0000
DA_INFO   : 0xC0 , Ver : 3.2 , BBID : 0x8B
DA_CSTAT  : 0x5A
SOC_VERIFY : 0xC1
BOOT_STYLE : SF_FLASH_BOOT
NOR Flash IC initialized
[0] : FLASH_VEN : 0x00DC , [MX] MX25U6435E
[0] : FLASH_DIE : 00C2 0025 0037 0000 
[0] : FLASH_LEN : 0x00800000
INT_RAM : 0x0000D000
EXT_RAM : 0x00800000
SDS_INFO : 0x007FE000 , 0x00002000
Reading Flash Content now ... 

Read Flash now
Read Ok , 8388608 bytes read
Check and collect compile info
File_Info   : KEYTAK60A_64_11B_PCB01_gprs_MT6260_S00.MAUI_11B_W13_08_MP_V3_F5.bin
FileVersion : MAUI.11B.W13.08.MP.V3.F5
Saved to : C:\InfinityBox\CM2MTK\Read_out\

KEYTAK60A_64_11B_PCB01_gprs_MT6260_S00.MAUI_11B_W13_08_MP_V3_F5.bin

How To Flash:

its a bin flash file and you can flash it with any flashing box or flash tool which is support to flash MT6260 Chip.

lock 0000

Free firmware Without password

Read Flash now Scatter
Read Ok , 8388608 bytes read
Check and collect compile info
File_Info   : KEYTAK60A_64_11B_PCB01_gprs_MT6260_S00.MAUI_11B_W13_08_MP_V3_F5.bin
FileVersion : MAUI.11B.W13.08.MP.V3.F5
[ScatCFG] : MT6260 / MAUI.11B.W13.08.MP.V3.F5 / NOR , SF
Firmware saved to : C:\InfinityBox\CM2MTK\Read_out\

KEYTAK60A_64_11B_PCB01_gprs_MT6260_S00 Scatter

 How To Flash MTK Feature Phone:

• Its a Scatter file you can flash it with Flash Tool or any Flasher Box 
• Select “scatter-Loading” and Slect XXXX_cfg in folder
• Wait file to be added into Flash Tool Or Any Flashing box
• Turn off your phone
• Press “Download” Button to start
• And connect your phone with PC via USB data cable.
• The process will start and a red progress bar will appear after color purple, yellow.
• And green circles display
• Finish !
• You can now safely disconnect your phone and turn it on.
• its Done..!

Full Tutorial Here

Done!

Join Us!