QMobile S3 MT6580 Firmware Tested

Inital Boot Ok!
BB_CPU_PID : 6580
BB_CPU_NME : [MediaTek] MT6580_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with SPRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1552.01.01
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x94
NAND Flash : NOT INSTALLED
eMMC Flash : 90014A484147326505074F67CDBC1315
Initialize Memory ... 
DRAM already initialized by Preloader
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x90 , OEM : 014A
[eMMC] : FLASH_INF : [HYNIX] , e2GA
[eMMC] : FLASH_CID : 90014A484147326505074F67CDBC1315
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000003AB800000
[eMMC] : FLASH_UCP : 15032 MiB [eMMC 16 GiB]
DEV RID    : 7BC92298FD4339A1B39626CAED561F41
INT RAM    : 0x00020000
EXT RAM    : 0x80000000
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content ... 
Brand     : QMobile
ProdName  : QMobile_S3
ProdModel : QMobile S3
Device    : QMobile_S3
AndroidVer: 5.1
MTKxCPU   : MT6580
MTKxPRJ   : ALPS.L1.MP6.V2_RGK6580.WE.L_P2
[Read Ok] : preloader_d5192_qmobile.bin
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : logo.bin
[Read Ok] : secro.img
[Read Ok] : system.img
[Make Ok] : cache.img
[Make Ok] : userdata.img
[ScatCFG] : MT6580 / V1.1.2 / d5192_qmobile / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 2668 MiB
Scatter saved to :

MT6580_QMobile_S3_5.1_ALPS.L1.MP6.V2_RGK6580.WE.L_P2

Password: Gsm.Marhaba

[post_ad]

NVM Read Ok,
MT6580_S00_D5192_G4_W5_MP_V0_0_6_S150912_1_wg_n_eMMC.spnv

How To Flash:

Its a Scatter file you can flash it with Sp Flash Tool or any Flasher Box 

Select “scatter-Loading” and Slect MT6575_Android_scatter.txt in folder
Wait file to be added into Flash Tool + Any box
Select “Download Only” or if upgrade “Firmware upgrade” in Flash Tool
Turn off your phone
Press “Download” button to start
And connect your phone into the computer via USB data cable.
The process will start and a red progress bar will appear after color purple, yellow.
And green circles display
Finish !
You can now safely disconnect your phone and turn it on.
Full Tutorial Here